70 presets (*) for Axe-Fx III firmware 8.0 (older firmware not supported), for all styles of high gain. All the presets have multiple scenes, most of the time including rhythm, crunch and lead settings. As you can see in the presets list, I focused on a few brand of amps, there’s also a second Rock & Metal pack with other amp models not used here.
(*) 66 presets for latest firmware version included, which is 32.01 ; I didn’t update some of the older bonus presets but they’re also available in the “old firmware” sub-folder.
Also included are 29 user cabs, which must be installed at the user spots indicated by their names (see video, link below). Some of those cabs are my personal mixes of Valhallir.at cabs. Check all their cabs here : http://valhallir.at/en/
Presets list:
| USA MK II C+ TM A | 5153 Blue 100W | Friedman HBE V1 |
| USA MK II C+ TM B | 5153 Blue 50W 1 | Friedman HBE V2 |
| USA MK II C+ TM A+B | 5153 Blue 50W 2 | Shirley One |
| USA MKIIC+ valhallir | 5153 Blue 50W 3 Valhallir | Shirley Two |
| USA MKIIC++ II | 5153 Red 1 | Shirley Three |
| USA MKIIC++ III | 5153 Red 2 | Shirley Four |
| USA Pre Green | 5153 Red 3 | Friedman Small Box |
| USA Yellow 1 | 5153 Red 4 | Friedman Small Metal Box |
| USA Yellow 2 | 5153 Red 5 | Dizzy V3 Silver |
| USA Pre Red 2 | 8 shades of Friedman BE | Dizzy V4 Silver |
| John P Awake | Friedman BE | Tool The Pot Diezel VH4 |
| John P JP2C | Friedman BE V1 (1) | Tool Pneuma Diezel VH4 |
| John P Recto | Friedman BE V1 (2) Vallhalir | Fat Herbie |
| USA MK IV LD 2 | Friedman BE C45 | Savage 1 |
| USA Mark V | Friedman BE C45 (2) | Savage 2 |
| Dual USA RTM | Friedman BE V2 | FAS Modern I |
| Recto2 Red Mod/Vntg | Friedman BE metal | FAS Modern III |
| Recto2 Orange Mod/Vntg | Friedman HBE 2018 | Modern Savage II |
| Recto1 Red/Recto2 Red Modern | Friedman HBE 2018 C45 | Fryette D60 M |
| Recto1 Orange Normal/Modern | Friedman HBE | TDR Rockman X100 dist |
Electric Aussie Sunrise Inspired by Plini (*)
Andy T. VA 5.0 Inspired by my favorite guitar player, Andy Timmons (*) (preset renamed for Cygnus)
The story of gravity Inspired by Steve Vai (*)
(*) I was at Vai Academy 5.0, which was about sound sculpting, and where I got to meet (and jam with !) artists like Steve Vai, Andy Timmons, Plini, Devin Townsend or Larry Mitchell. So when they detailed their pedals/amps/effects settings, I took notes, recorded videos etc.
Important note : I made the “Lead” scenes louder than the other scenes on purpose, as those presets has been made with the gigging guitarist in mind. Of course, they also work for recording. The Input 3 block is there for reamping.
These presets are also made to work with a FC-12 and two expression pedals (most of the time, one for volume, one for wha).
During the months I worked on them, I released a few teasers, here they are :
Demo for a bonus presets added for firmware 14.01 :
I just improved Tool’s “The pot” preset :
Check this video for the presets cabs installation procedure :
You need to drag & drop each cab to its correct spot, according to its filename (Cab 003 goes to user spot 003, etc.)
Note that if cabs must be stored at specific user slots, presets can be put anywhere in your Axe-Fx III.
14 comments
Glenn Brackett
Hello.
I just recently installed the update for Firmware 21.00 & it sounds great!
It is obvious that you really work hard on these presets & IRs.
You do a great job & offer quality products.
I will be back to purchase more soon.
Thank you & GOD bless!!!
[email protected]
These days we have a number of choices as consumers regarding our software and accessories. However, from the very start this gentleman‘s work was beyond compare. I currently own several of the packages and can attest that the sounds are as splendid as what you hear on the video and audio. That’s not saying that I can play like him! That would be really something. However, the tones are all there. Strongly recommended without reservation. Kudos Maestro.
Brent Mammen
Just bought the Rock/Metal pack and loving it! One question though, on the “Chords pad 1” preset I can’t figure out how to change the foot pedal used for the volume of the Synth(s), any suggestions?
Fremen
Hello, thanks for your comments, glad you like the pack ! This is a sample preset from my “Synthpads & Drones” pack. The volume block isn’t attached to any foot controller, I use it to fine tune the volume of the synths globally, else, each time I would want to tweak it, I’ll need to do it on each channel of the synth block.
Michael Lechner
Loving the Rock & Metal Pack! Will you be updating this for the new Cygnus firmware? Thank you!
Fremen
Thank you ! yes, I will update all my packs, this one included. It will take some time though, weeks, if not months for all of them. But this pack is the second one I’ll update, after the Pink Floyd one
Julian Tellez
Hi there, any update on this pack for latest firmware??
Fremen
Yes, 12.06. Released 9 weeks ago
Shai tan
Really hoping you will be doing Presets for the Fractal FM3.
Fremen
I will ! I just need to get one. Already paid for it, it’s currently in the US, waiting for planes to be allowed to land in my country.
QI CHENG GANG
Do you have Steve Vai in it? Which one is it?
[email protected]
The Steve Vai preset is spot on. I originally purchased the Package largely because of the Vai preset. If you’re anything like me, then you often make a purchase of a preset and the subsequent download leaves you disappointed and frustrated when you play it, as it fails to even resemble the tone you thought you had purchased. You then ask others and get remarks such as “well maybe you were using the wrong guitar” or the wrong cable or monitor or the wrong computer! This is not the case with these presets. If you hear the tone in his advertisement, you will get the tone when you use it with your rig! It’s simply amazing. This guy is the best.
QI CHENG GANG
Hello! I bought fremen-axe-fx-iii-rock-metal-pack-1. Do you have Steve Vai in it? Which one is it?
Fremen
Hello, yes, it’s “The story of gravity”